Wednesday, October 24, 2012

Wind Turbine Light Fixture



I was pretty excited about the Hardware Store Week challenge at So You Think You're Crafty.  Lowe's is my absolute favorite store, followed by Home Depot for a close second.  It's so fun to walk around the aisles and try to see a new use for all of those supplies.

I had seen vintage turbine fans turned into light fixtures on some pricey websites.  All that I had seen were well over a couple hundred dollars.  I loved the look, but couldn't justify the price.  I needed a light fixture for my craft studio and I had a feeling I could DIY my own version.

I started with a wind turbine exhaust fan from Lowe's.  It was about $35, but I have since seen a few on clearance at my local Lowe's.  I think these are mainly used in attics or barns.  They came in a couple of different colors, but I planned on painting mine, so I wasn't picky.

Here's what she looked like after taking her out of the box.  There are basically two pieces.  In addition to this fan piece, there is a tube type of piece that the fan sits on.  I didn't use any part of that piece for this project, but maybe I can find a new use for it in the future.

At this point, my dad and I just started taking pieces apart.  We were trying to get all of the "extra" pieces off so that we were left with just the fan blades for the light fixture.  This little plastic piece was at the top, holding the apparatus that allowed the thing to turn.  We pried it off with a screwdriver.

We started unscrewing pieces, trying to cause the least amount of damage.  We still wanted it to be structurally sound, but I didn't want all of the inner workings.  They would be in the way of my pendant light.

We ended up doing more work than we had to.  In the end, we just took some metal snips and cut the three support bars that were holding all of the pieces in.  Once those were cut, we were left with the outer shell which was going to function as the shade for the fixture.

At Lowe's, I picked up one of the pendant light kits.  It was sold in the small endcap area with different types of glass shades so that you can mix and match to make your light fixture.

 I unscrewed the metal rod that covers the electrical wiring and threaded this part of the fixture up through the bottom of my shade.  Then, I had to thread the wiring back through that metal rod and screw the rod back into the fixture.  Basically, think of it as sandwiching your shade (the exhaust fan) between the light socket and the metal pendant rod.

Here she is, all ready for paint!  I gave the whole thing a couple of good coats of oil rubbed bronze spray paint, let it dry well, and it was ready to go!

The light fixture now hangs in my studio and casts the prettiest design on the ceiling when the light is on in the evenings.  It's the first thing that gets a comment when people walk into that room.  Everyone wants to know more about it.

Home Stories A2Z


Funky Junk's Saturday Nite Special

21 comments:

  1. GASP! What a great idea!!!
    Thanks for the post.

    Buffie
    http://papercuts4u.blogspot.com/

    ReplyDelete
  2. Wow, that is a great idea. I remember having these on my old house. Great job.
    Thanks for sharing. I am your newest follower.

    ReplyDelete
  3. This is EXACTLY what I was looking for for my kitchen! I need 3 of them it will be AWESOME!

    Thank you!

    ReplyDelete
  4. This is so unique and COOL! Love it :) Laurel

    ReplyDelete
  5. Ohh! saw this at I LOVE THAT JUNK! (DONNA'S) such a cool idea.

    great job!
    Pat

    ReplyDelete
  6. That looks great! What a neat idea.

    ReplyDelete
  7. So clever! I love how sleek and modern it is!
    I would LOVE for you to link this up at my Ginger Jamboree Link Party!!

    ReplyDelete
  8. Beautiful job! Very creative way to get that high end indutrial chic look :)

    ReplyDelete
  9. What a fantastic light! I just love repurposed items! I'm pinning this one!

    ReplyDelete
  10. Brilliant! What a fun light fixture...I love it. :)

    ReplyDelete
  11. I love what you did to the exhaust fan! I can almost see what it would look like with the lights on – kinda like a disco ball with all the flashing lights! :D What did you do with the unused parts of the fan, by the way?

    Staci ^.^

    ReplyDelete
  12. Is there anyway you could send me a picture of what it looks like lighted up? My e-mail address is susan.nagel@gmail.com. Such a cool idea... thanks!

    ReplyDelete
  13. This is an exhaust fan, am I right? Gawd! You're so witty! Even I wouldn't have thought of using an exhaust fan as light fixture. This is amazing! It's so unbelievably awesome!

    FAKE ACCT NAME HERE

    ReplyDelete
  14. I found your blog via Funky Junk Interiors - love this light and it looks so expensive! Thanks for sharing!
    ~Katie @ Upcycled Treasures

    ReplyDelete
  15. Love you light! So fun and looks great!

    ReplyDelete
  16. forget buying em new--sure theres plenty laying around to pick from.

    ReplyDelete
  17. Great repurposing project! Thanks for sharing.

    ReplyDelete
  18. Cool Idea!!
    I'm a cheapskate tho...I'm the kind of person who refuses to pay for anything that can be found for free(IE: dumpster diving)...
    I have 2 of these in my workshop, both I got from houses that were being tore down...

    TY for sharing a cool idea/project!!

    ReplyDelete